 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| QRD1113, QRD1114 -- Reflective Object Sensor January 2008 QRD1113, QRD1114 Reflective Object Sensor Features PACKAGE DIMENSIONS Phototransistor Output No contact surface sensing Unfocused for sensing diffused surfaces Compact Package Daylight filter on sensor Description The QRD1113/14 reflective sensor consists of an infrared emitting diode and an NPN silicon phototransistor mounted side by side in a black plastic housing. The onaxis radiation of the emitter and the on-axis response of the detector are both perpendicular to the face of the QRD1113/14. The phototransistor responds to radiation emitted from the diode only when a reflective object or surface is in the field of view of the detector. Package Dimensions 0.083 (2.11) OPTICAL CENTERLINE 0.240 (6.10) 0.120 (3.05) PIN 1 INDICATOR 0.173 (4.39) 0.183 (4.65) 0.500 (12.7) MIN 0.020 (0.51) SQ. (4X) 2 3 Schematic 0.100 (2.54) 1 4 2 3 0.083 (2.11) PIN 1 COLLECTOR PIN 2 EMITTER PIN 3 ANODE PIN 4 CATHODE 1 4 Notes: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Pins 2 and 4 typically .050" shorter than pins 1 and 3. 4. Dimensions controlled at housing surface. (c)2005 Fairchild Semiconductor Corporation QRD1113, QRD1114 Rev. 1.1.0 www.fairchildsemi.com QRD1113, QRD1114 -- Reflective Object Sensor Absolute Maximum Ratings (TA = 25C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol TOPR TSTG TSOL-I TSOL-F EMITTER IF VR PD SENSOR VCEO VECO PD Collector-Emitter Voltage Emitter-Collector Voltage Power Dissipation(1) 100 30 V V mW Continuous Forward Current Reverse Voltage Power Dissipation(1) 50 5 100 mA V mW Parameter Operating Temperature Storage Temperature Lead Temperature (Solder Lead Temperature (Solder Iron)(2,3) Flow)(2,3) Rating -40 to +85 -40 to +100 240 for 5 sec 260 for 10 sec Units C C C C Electrical/Optical Characteristics (TA = 25C) Symbol Parameter INPUT (Emitter) VF IR PE BVCEO BVECO ID COUPLED IC(ON) IC(ON) VCE(SAT) ICX tr tf QRD1113 Collector Current QRD1114 Collector Current Collector Emitter Saturation Voltage Cross Talk Rise Time Fall Time IF = 20mA, VCE = 5V, D = .050"(6,8) IF = 20mA, VCE = 5V, D = .050"(6,8) .050"(6,8) .200 10 50 IF = 40mA, IC = 100A, D = 0.300 1 0.4 10 mA mA V A s s Forward Voltage Reverse Leakage Current Peak Emission Wavelength Collector-Emitter Breakdown Emitter-Collector Breakdown Dark Current IF = 20mA VR = 5V IF = 20mA IC = 1mA IE = 0.1mA VCE = 10 V, IF = 0mA 30 5 100 940 1.7 100 V A nm V V nA Test Conditions Min. Typ. Max. Units OUTPUT (Sensor) IF = 20mA, VCE = 5V, EE = 0(7) VCE = 5V, RL = 100, IC(ON) = 5mA Notes: 1. Derate power dissipation linearly 1.33mW/C above 25C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron tip 1/16" (1.6 mm) minimum from housing. 5. As long as leads are not under any stress or spring tension. 6. D is the distance from the sensor face to the reflective surface. 7. Crosstalk (ICK) is the collector current measured with the indicated current on the input diode and with no reflective surface. 8. Measured using Eastman Kodak neutral white test card with 90% diffused reflecting as a reflecting surface. (c)2005 Fairchild Semiconductor Corporation QRD1113, QRD1114 Rev. 1.1.0 www.fairchildsemi.com 2 QRD1113, QRD1114 -- Reflective Object Sensor Typical Performance Curves Fig. 1 Forward Voltage vs. Forward Current 1.60 1.40 Fig. 2 Normalized Collector Current vs. Forward Current 10.0 Fig. 3 Normalized Collector Current vs. Temperature 1.0 IC - COLLECTOR CURRENT (mA) IC - COLLECTOR CURRENT (mA) VF - FORWARD VOLTAGE (mV) 1.20 1.00 0.20 0.60 1.00 0.8 0.6 0.10 0.4 0.01 VCE = 5 V D = .05" .001 0.2 0.40 0.20 0.1 1.0 10 100 IF = 10 mA VCE = 5 V 0 0 10 20 30 40 50 -50 -25 0 25 50 75 IF - FORWARD CURRENT (mA) IF - FORWARD CURRENT (mA) TA - AMBIENT TEMPERATURE (C) Fig. 4 Normalized Collector Dark Current vs. Temperature 102 VCE = 10 V NORMALIZED - COLLECTOR CURRENT (mA) Fig. 5 Normalized Collector Current vs. Distance 1.0 .9 .8 .7 .6 .5 .4 .3 .2 .1 0 0 50 100 150 200 250 300 350 400 450 500 IF = 20 mA VCE = 5 V ID - COLLECTOR DARK CURRENT 101 10 1.0 10-1 10-2 10-3 -50 -25 0 25 50 75 100 REFLECTIVE SURFACE DISTANCE (mils) TA - AMBIENT TEMPERATURE (C) (c)2005 Fairchild Semiconductor Corporation QRD1113, QRD1114 Rev. 1.1.0 www.fairchildsemi.com 3 QRD1113, QRD1114 -- Reflective Object Sensor TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. PDP-SPMTM SyncFETTM (R) Power220(R) (R) Power247 The Power Franchise(R) POWEREDGE(R) Power-SPMTM PowerTrench(R) TinyBoostTM Programmable Active DroopTM TinyBuckTM (R) QFET TinyLogic(R) QSTM TINYOPTOTM QT OptoelectronicsTM TinyPowerTM (R) Quiet SeriesTM TinyPWMTM RapidConfigureTM TinyWireTM Fairchild(R) SMART STARTTM Fairchild Semiconductor(R) SerDesTM (R) SPM FACT Quiet SeriesTM UHC(R) STEALTHTM FACT(R) Ultra FRFETTM SuperFETTM FAST(R) UniFETTM SuperSOTTM-3 FastvCoreTM VCXTM (R) (R)* SuperSOTTM-6 FlashWriter SuperSOTTM-8 * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. FPSTM FRFET(R) Global Power ResourceSM Green FPSTM Green FPSTM e-SeriesTM GTOTM i-LoTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I32 ACEx(R) Build it NowTM CorePLUSTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EZSWITCHTM * TM 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production (c)2005 Fairchild Semiconductor Corporation QRD1113, QRD1114 Rev. 1.1.0 www.fairchildsemi.com 4 |
Price & Availability of QRD111308
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |